Grip- N- Pull Bullet Puller

[grizzly340]

I just watched A video on tv A guy pulling 3 bullets with the hammer while his wife pulled 3 using the Grip N Pull. No contest. Half the time and you just put the bullet in the press run it thru the top grab and push down. Nothing to it. Nothing to take apart. Bullet is in your hand and you just dump the powder back in the can or reload it.

[.257]

That's how l do it. Run the cartridge up without a die in the press. Grab the bullet just ahead of the neck with a RoboGrip and press down. I even reload the bullets in practice loads

[PARA45]

I've seen that before on TV.  Neat gadget.

[ifuonlynu]

I use the Hornady grip pull its the best thing on my bench.

[BB340]

I have a set of those too. And I don't like them. If you have to pull a couple then they are ok. But if you need to do a lot then your hand will get tired real quick. Well at least mine does and I have great endurance in my arms and grip from using a wheelchair. Or maybe the ones I have are just too hard to squeeze... I use the inertia puller. I put a piece of foam down the bottom so as it doesn't damage the projectile.

[Buckleman]

I use RCBS collet puller. Had it for about 40 years. Works great no effort reuse bullet.

[Chris338378]

I use RCBS collet puller. Had it for about 40 years. Works great no effort reuse bullet.

Personally this is the one I like best and the best part is there's minimal damage to the bullet when you use it.

[nciowan]

I have a set of those too. And I don't like them. If you have to pull a couple then they are ok. But if you need to do a lot then your hand will get tired real quick. Well at least mine does and I have great endurance in my arms and grip from using a wheelchair. Or maybe the ones I have are just too hard to squeeze... I use the inertia puller. I put a piece of foam down the bottom so as it doesn't damage the projectile.

I agree. I will put leather gloves on when using them. Will also use my inertia puller, with foam, if need to pull more than a few.
Duane